| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000POE02WX |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 Sequoia) | ||
|
Vehicle Position Mark Deviates Greatly |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK GPS MARK |
|
(a) Check that the GPS mark is displayed. OK: GPS mark is displayed. |
|
|
3. |
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE) |
|
(a) Enter the "Navigation Check" mode (Vehicle Sensors)
|
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.
OK:
The readings are almost equal.
|
|
5. |
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE) |
|
(a) Check that the display changes between ON and OFF according to the shift lever operation (P and R). OK:
HINT:
The display is updated once per second. It is normal for the display to lag behind the actual switch operation. |
|
|
|